How to Extend Wifi Range Without Extender 8 Ways

We have discussed 8 ways how to extend wifi range without extender by following these easy to follow steps you will be able to extend the range without even using the extender.

None of us is unfamiliar with the fact that it causes immense frustration when the Wi-Fi signal stops connecting, or even just drops for that matter. Imagine trying to stream your favourite movie online and the screen keeps buffering till the end of time, all because you are sitting on a different floor than that of your Wi-Fi. Irritating, right? We have written a guide on how to extend the wifi range without the extender.

There are a lot of factors that might be affecting your WIFI’s signal, some so minute that it might not even need another mesh set up, an extender or a booster.

If you stand among the ones who are wondering if there is any way out of this in the most budget-friendly way possible or if you could get a strong connection in spite of standing rooms away from the router, then this article is definitely for you.

Step by step Guide on How to Extend Wifi Range Without Extender

Below have been pointed out and explained a few remedies to this situation without having to purchase an extender or a booster:

Step 1:- Position the Router Correctly:

A lot of people seem to ignore this factor, but the positioning of the router plays a huge role in how the Wi-Fi signals are going to spread across the house.

Even the best Wi-Fi router will fail to provide the user with satisfactory results if it is not positioned correctly.

The Wi-Fi signal faces a lot of interference by walls, furniture, other wireless devices or even hard materials like glass, metal etc. It is only natural to find it convenient to place the router in a hidden space, but it is highly advised to place it in the open air, probably on a bookshelf or a countertop, so that the machine does not heat up and can provide its best signal.

Step 2:- Antennas to be Taken Care Of:

It is rather shocking what a dramatic impact will fall upon the user’s Wi-Fi signal if the antennas are pointed upwards, or even pointed towards the direction the user might be in. The antennas help in directing the signal, hence pointing them upwards will help in spreading the signal evenly across the house.

In case the user’s router does not have any external antenna, it is suggested to buy and put them to good use because they can really help.

Step 3:- Use a Wi-Fi Analyzer:

A network analyzer helps in identifying the problems that result in the slow speed of the network or even have an impact on its reliability. This tool helps in gathering information on how to fine-tune its settings or reveal parameters that can help increase the level of performance the network can deliver. It also helps identify the overlapping Wi-Fi channels or traffic bottlenecks.

Disconnect unused devices for better performance: It is important to make sure all the other devices, that are not being used but are connected to the router, have been disconnected for better performance. If too many devices are connected at one time, it weakens the signal of the user’s bandwidth.

It might not be a fancy hack, but it sure is helpful (pro-tip: log in to your router on your computer and you might end up finding unrecognized devices logged in to your network, go ahead and remove them for better signal).

Step 4:- Frequent Router Updates:

It might be unknown to a lot of people, but like most smartphones, computers or other hardware devices, the router needs to be updated too, in order to help them receive new updates from their manufacturers. These updates are designed to help the routers perform better, hence resulting in better signal transmission and in-depth security.

Step 5:- Foils Can Do Wonders:

Might sound a bit bizarre, but foils have proven to work. Foils tend to reflect the signals in the direction that the users want them to go. Setting the foil vertically in between the objects that the user does not want his/her Wi-Fi signals to get absorbed by should help. The foil stops the signals from running everywhere.

Step 6:- Shift to 2.4 GHz:

While 5 GHz might give a stronger signal, it does not pass through walls. Therefore, if the user is working in a room or space away from where the router is situated, then it is highly recommended to shift from 5 GHz to 2.4 GHz as this signal travels through walls or ceilings. Most routers have 2.4 GHz and 5 GHz listed separately.

In case it cannot be found in the available Wi-Fi networks section of the device, then logging into the router setting on a web browser using the address on the back of the machine should be helpful.

Step 7:- Change the Wi-Fi Channel:

One of the reasons why one might face hindrance on their Wi-Fi network could be because a lot of people in the area might be using the same Wi-Fi channel as the user. That results in slowing down or dropping off of the network. To optimize the Wi-Fi signal, it is advised to change the channel.

2.4 GHz has 11 channels and 5 GHz has 45 channels which might look like a lot of options, but not all of them are always available. For 2.4 GHz channels 1, 6 and 11 are always the best choices since they don’t allow overlapping with each other. On the other hand, there are 24 non-overlapping channels that can be chosen from the 5 GHz band.

Running a wireless scan on the device to look for the strongest channels is also a good idea.

Step 8:- Reboot the Router:

At times the solution to major problems is a simple one. Try rebooting the router, leaving it as it is for 30 seconds or a little more, then switching it back on again. A hard restart often refreshes the device to work better and faster, just like a power nap for us, humans.

Final Thoughts:

Get a New Router: If all of the above-listed solutions fail to bring to the user a better signal from his/her wifi, then it is time to purchase a new router and if you have solved the problem from the above steps and now know how to extend wifi range without extender, we hope you liked our presentation.

Please add "Disqus Shortname" in Customize > Post Settings > Disqus Shortname to enable disqus or remove '#' to disable comment section