How to Connect IP Camera to Wifi Router

In this article, we will show you the correct process of How to connect IP camera to wifi router with simple and easy to follow steps

This can be a hassle for someone who’s not into technical things but we’ve compiled all the information step by step on how to connect an IP camera to a wifi router in an easy manner for everyone.

Below are five major’s we’ll be discussing in this article.

  • Bullet 1- What is an IP Camera?
  • Bullet 2- What Are the Uses of an IP Camera?
  • Bullet 3- How Can an IP Camera Be Connected to a Wi-Fi Router?
  • Bullet 4- What are the Pros and Cons of an IP Router?
  • Bullet 5- Conclusion

How to Connect IP Camera to WiFi Router – Detailed Information

Here is the detailed Informational and step by step guide to connect your IP camera to a Wifi router.

An IP camera is short for an Internet Protocol camera. It is a networked digital video camera that receives control data and sends images over a Fast Ethernet link. Ip cameras, therefore, are also known as network cameras. These network cameras are most often used for IP surveillance, a digitized and networked version of closed-circuit television (CCTV). But unlike CCTV cameras, they require no local recording device, only a local area network (LAN).
In short, an IP camera is a type of digital video camera that sends and receives data through the help of the internet.

Bullet 2- What Are the Uses of an IP Camera?

The major use of an IP camera is Surveillance. It is used in homes, offices, schools, colleges to have a feeling of security and safety. Due to its easy installation and wireless capacity, it is widely used in all kinds of places for surveillance. An IP camera live streaming gives the broadcaster maximum control. As the name already suggests, this digital camera does not need any constant human operator on the field always.
So, it can be used in situations like the following list, which can replace human presence in terms of security, to some extent-
Point 1
– inside classrooms and lecture theatres
Point 2 – traffic cameras
Point 3 – insides home for personal security
Point 4 – business and event security cameras
Point 5 – sports complexes etc.


IP Cameras can also be used to monitor machinery and reduce downtime. IP cameras also provide with following-
Point 1 – audio alerts
Point 2 – thermal detection of overheating
Point 3 – level monitoring etc.
Clearly, the IP camera has a wide range of uses it has to offer to its users.

Bullet 3- How Can an IP Camera Be Connected to a Wi-fi Router?

Network cameras seem to be gaining extreme popularity, and why would it not, given the wide array of services that it can provide with their ever-improving quality, features and declining prices. Following are provided the steps that need to be followed in order to connect an IP camera to a Wi-Fi router.


NOTE- ensure that you can view the camera on the desktop or laptop when the camera is connected to the router via Ethernet cable.


Step 1- Determine the WIFI strength of Your Wireless Signal: the first and extremely important step when considering a security camera system is understanding the limitations of wireless equipment.

It is relevant to test the connection strength at every nook and corner of every location you intend to mount a wireless security camera at. It is recommended in order to make sure no compromises are made when it comes to wireless because it can be troublesome to troubleshoot.


Step 2 – Make the right configurations for your network: The default wired IP address of our IP cameras NVRs are 192.168.1.108 unless they are changed. The user might have to change those configurations of the network in order to be able to view the camera’s web service.


Step 3 – Make the Connections: Use an Ethernet cable to connect the camera to the LAN port of the wireless router first. A wired connection would be needed to configure the camera at the very beginning.


Step 4 – Configuration interface of the camera: On a desktop or laptop which is connected to the same wireless router, open INTELLIGENT IP INSTALLER (can be found in the resource CD) and then highlight your camera. Click the link to the IE button, IE will automatically start and the login window will be prompted.

Following that, type the username and password in the login page (default username and password both are: admin), then click ok to connect to the device. The web configuration interface will be displayed there.


Step 5– Access IP Camera’s Web Interface: Now go to the camera’s IP address. Login using the username and password. Then, navigate to [Setup> Network> TCP/IP]. NOTE that, you cannot connect a camera to Wi-Fi by using the NVR web interface you must be inside of the camera. To verify you are in the correct web interface, check the picture on the top left and make sure it says IP CAMERA and not WEB SERVICE.


Step 6 Configure the Wi-Fi address: Select the drop-down box that states WIRE(DEFAULT) and select the wireless option. Click the button next to the drop-down box that says DEFAULT.

Proceed to select the RADIO button marked STATIC. Now the address of the camera can be altered. It is also to be made sure that the address is not the same as another device on the network.
HIT SAVE AFTER IT IS DONE.
LOG IN AGAIN.


Step 7 – Connect the IP camera to the router: Navigate to [Setup> Network> Wi-Fi] and check the box labelled ENABLE. After having discovered your network, double click on it and enter your credentials.


Give your camera 2 minutes to boot, as it might take up a while to connect, and connect to the wireless network you just configured. Then try connecting to the camera using the web browser using the wireless IP address.


You will be able to view the login page for the camera. The camera is ready to mount!

Bullet 4 – What Are the Pros and Cons of Installing an IP Camera?

Everything in the whole wide world is bound to have its Pros and Cons. Here are some of the IP Cameras:

Pros
  • Easy to store the recorded videos.
  • Easy installation.
  • Affordable.
  • Can be extended easily.
Cons
  • Requires more bandwidth.
  • High risk of a security breach.
  • Complicated accessories.
  • Fewer data storage capacity.

CONCLUSION:  

By the end of the article, it is evident that being able to install IP cameras and connecting them with Wi-Fi routers would only turn out to be helpful in terms of security and safety. It is also extremely easy to install, so hassle-free. I hope this article on How to connect IP camera to wifi router helped you in doing so.

David Peter
Hi, this is David Peter from California, USA. By profession, I am working as an Telecommunication engineer with a reputable Telecommunications Company here in California. I am a tech savvy person, and that is why I love my job. This blog is my part time hobby, and I love to write reviews about different products based on my own knowledge and experience. When you go through my reviews, you will feel that they are unbiased reviews as they come direct from my heart for tech lovers. The purpose is to help and guide people who are looking to buy or upgrade their electronic gadgets like modems and routers etc. Enjoy and give your feedback in comments!
Please add "Disqus Shortname" in Customize > Post Settings > Disqus Shortname to enable disqus or remove '#' to disable comment section